Loading...
ALFOplus
ALFOplus

ALFOplus80 is the Carrier Grade, FDD radio equipment for E-band applications providing a MultiGigabit capacity with a Zero Footprint, Full Outdoor mechanical arrangement. This next generation solution is the ideal alternative to expensive fibre deployment whilst retaining the same capacities and performance.

ALFOplus80 provides up to 2.5Gbps radio net throughput with less than 5microsec constant latency, representing an ideal solution for LTE (even in CPRI architecture) and for high capacity networks deployment, either as an alternative or in conjunction with fibre. With 64QAM and ACM + ABR (Adaptive Bandwidth Rate) from 4QAM up to 64QAM, ALFOplus80 achieves high reliability in in-field applications.

Such extremely high capacities can be managed in Full Outdoor equipment, and where required, split mount architecture is also available with the AGS-H complementary equipment.

ALFOplus80, optimising the potential of E-band!

 

MAIN FEATURES

 

  • 71-76/81-86GHz frequency arrangement (according to EN 302.217-2/3)
  • Up to 2.5Gbps radio net throughput
  • 50MHz, 500MHz, 750MHz and 1.000MHz channel bandwidth support.
  • Up to 64QAM Adaptive Code and Modulation + Adaptive Bandwidth Rate, both Jitter and Error-free
  • 2xGE ports, both 10/100/1000baseT and 1000baseX available.
  • “Fibre like” behaviour with 5microsec latency (ideal for CPRI transport)
  • Packet Header Compressor, supporting Multi-protocol and Enhanced Tunneling protocol stacks
  • Complete Synchronism Package (SyncE + 1588v2) management.
  • Complete QoS package (Ethernet, IPv4/v6, MPLS “Exp” bits) and fully featured VLAN management
  • Optional “Indoor Unit” (AGS-H) to provide MultiGigabit and additional 2xSTM-1 + 16xE1 transparent transport
  • “Zero-footprint” design with optimised heat dissipation for extremely reduced power consumption
  • POE power supply available on all electrical ports. External power supply also available
  • Linux or Unix based NMS, HTML based local access (no Flash needed)

 

MAIN APPLICATION

ALFOplus80 is ideal for high capacity and reactive Network deployment, being “fibre like” in terms of performance and capacity, and having the installation agility and deployment cost saving, it becomes the best choice for Next Generation 4G/LTE architecture, and also for dedicated “high value” and strategic connections, like:

  • Alternative or complementary to MultiGigabit high capacity fibre deployment.
  • Fibre backup and disaster recovery.
  • CPRI transport for Small Cells distributed deployment.
  • Mobile and 4G/LTE Networks backhaul.
  • Micro and Macro Cellular Network infrastructure.
  • High Capacity MultiGigabit Leased Lines.
  • Carrier Grade connection to service providers (ISP).
  • Municipal and Private Network backbones.
  • Gigabit LAN/WAN backbone connection.
  • Intra-Enterprise reliable and resilient connections.
  • High capacity TDM transport (PDH+SDH) in E-band (with AGS-H)
ALFOplus2
ALFOplus2

ALFOplus is a Full Outdoor, Full IP Next Generation Microwave Radio. ALFOplus is a zero footprint, highly cost effective solution, fully compatible with 3G, 4G and  LTE nodes, and the ideal solution for a fast and flexible evolution towards full IP networks with the highest radio capacity and performance. With its advanced Ethernet features and complete synchronization management (SyncE and 1588v2), ALFOplus is a state-of-the-art IP radio, providing the foundation for a leading edge network. SIAE produce RF components with Best-in-class system gain across all the frequency bands andadopt the latest technological developments to achieving the highest MTBF figures and the lowest power consumption available on the market.

MAIN FEATURES

 

  • FREQUENCY BANDS: 4 GHz → 42 GHz. ETSI and FCC standards plus 17GHz and 24GHz (unlicensed)
  • MODULATION SCHEMES: from 4QAM up to 1024 QAM.
  • TECHNOLOGIES: High Integrated Base-Band MCICS technology
  • CONFIGURATIONS: Unprotected, HSTBY, N+0
  • TDM CAPACITY RANGE: Upto 160xE1 Using PWE3
  • ETHERNET THROUGHPUT RANGE: 4 Mbit/s → 2 Gbps
  • ADVANCED DSP : Channel Digital Pre distortion, Equalizer and Packet Header Compression
  • TRIBUTARY INTERFACES: Multiport Gigabit switch (electrical/optical)
  • ARCHITECTURES: Full IP on  Single Board, full outdoor form factor.
  • OUTDOOR ARRANGEMENTS: External or integrated low profile, high performance antenna systems
  • SPECTRUM ARRANGEMENTS: ACAP, CCCP, XPIC, DUAL CARRIER
  • MANAGEMENT OPTIONS: Linux or Unix based NMS, HTML based local access (no flash needed)

 

 

MAIN APPLICATION

  • Any G-Mobile backhaul for Access and Aggregation
  • Emergency wireless links
  • ISP High Capacity LAN to LAN connections
  • Last mile fibreextension for business customers
  • Complementary solutions for fibre deployments/Ethernet Extension
  • Zero footprint applications
ALS Series
ALS Series

ALS Series is a carrier-grade wireless backhaul split mount solution, “fully programmable” broadband wireless system designed to meet any medium & high capacity transmission needs. It includes a wide type of interfaces: E1, STM-1, Gigabit Ethernet and PWE3 options, all available in unprotected, protected HSTBY, SD or FD with embedded proprietary XPIC technology. Each single IDU can be configured as protected, unprotected or 2+0. The Nodal IDU can aggregate, in a real “pay as you grow” approach, up to 16 independent directions and manage them as a single network element.

SIAE MICROELETTRONICA produce ODUs with Best-in-class system gain throughout the frequency bands and adopt the latest technological developments capable of achieving the highest MTBF figures and the lowest power consumption available on the market.

MAIN FEATURES

  • FREQUENCY BANDS: 4 GHz → 42 GHz. ETSI standards
  • MODULATION SCHEMES: from 4QAM up to 1024 QAM ODU solutions.
  • TECHNOLOGIES: Base-Band high circuit integration MCICS
  • CONFIGURATIONS: HSTBY, FD, SD, N+0 (N<8)
  • TDM CAPACITY RANGE: upto 4xSTM-1 and  upto 160xE1
  • ETHERNET THROUGHPUT RANGE: 4 Mbit/s → 2 Gbps
  • ADVANCED DSP : Channel Digital Pre distortion , Equalizer and Packet Header Compression
  • TRIBUTARY INTERFACES: NxE1, NxSTM-1, PWE3, FE/GE electrical/optical
  • SYCNRONISATION OPTIONS: E1, STM-1, SyncE, PWE3 recovery clocks (adaptive,differential), 1588v2 Support
  • ARCHITECTURES: Dual Native TDM and multi gigabit Ethernet in Modular and Single Board Compact form factor.
  • OUTDOOR ARRANGENTS: External or integrated low profile, high performance antenna systems
  • SPECTRUM ARRANGEMENTS: ACAP, ACCP, XPIC
  • NODAL CAPABILITY: Up to 16 independent directions for a unique “pay as you grow” nodal approach.
  • MANAGEMENT OPTIONS: Linux or Unix based NMS, HTML based local access (no flash needed)

MAIN APPLICATION

ALS Series provides Native IP and NativePDH and SDH connections; it is the ideal solution for a wide range of applications in access and backbone networks, covering any market segment ranging from cost-sensitive applications to advanced network implementations in which high capacities, complex protection schemes and excellent reliability are mandatory.

  • 2G / 3G / LTE Cellular Network
  • 10/100/1000 Mbit/s Ethernet connections SDFsd
  • Utility Networks (Railways, Pipelines, Utility Radios etc.)
  • Back-up transmission medium to Fibre Optic links
  • Spur Links for Backbones/Rings
  • Last Mile Fibre Extension
  • Leased Line Replacement
  • Private Data Networks (WANs, LANs,
  • SDH Radio Ring Deployment up to 4xSTM-1
  • Infrastructure > High Capacity Broadband Access Networks
First 1 Last